NTOUCH THERMOSTAT HOW TO
NTOUCH THERMOSTAT MAC

(Humidification set up is recommended for a contractor only.) Circulating Fan

Here you can check the HVAC settings, set the Circulating Fan feature and adjust your humidification settings, if you have an accessory installed. Pressing the factory reset button will change all settings back to default (except for the HVAC Equipment settings) and clear any HomeKit pairing so someone else can connect the Sensi Touch to Wi-Fi.

NTOUCH THERMOSTAT MAC

It includes your model number, MAC ID (uniquely identifies your thermostat), build date, firmware version, technical support contact information, and a factory reset button. This menu displays a quick glance at your thermostat information. Use the arrow in the upper left hand corner to return to the previous screen.Adjust the date or time using the up and down arrow buttons.If you’re going to connect Sensi to Wi-Fi, the date and time will be automatically generated based on your time zone. If you have Wi-Fi turned “Off” you will be able to set the date and time on the thermostat. Use the arrow in the upper left hand corner to return to “Schedule” screen.Continue to edit the set points as you desire.Use the arrow in the upper left hand corner to return to the set points.“Save” when you have the set point to your desired time and temperature.Adjust the set point using the up and down arrows.Select which set point you want to edit.Select which day grouping you want to edit: weekdays or weekend.If you are not connected to Wi-Fi, you can set a basic schedule with 4 points from the unit. If your Sensi Touch is connected to Wi-Fi, the schedule is programmed based on time and temperature set points from the Sensi app. Press the back arrow to return to the main screen.If connecting to Wi-Fi is not an option, turn off Wi-Fi on the thermostat and manually set a time and a schedule from the unit. You can also turn Wi-Fi on or off at any time.

NTOUCH THERMOSTAT HOW TO

The Sensi app will instruct you how to connect Sensi to Wi-Fi. You can display the current time, humidity or change from Fahrenheit to Celsius. Toggle what you want to see on the display from this menu. Note: The back glow switch on the thermostat base must be in the “off” position for this feature to work via the thermostat menu. Be sure to turn the light to “off” before snapping the thermostat face to the base.Īfter installation, you have the option to toggle the back glow on and off from the thermostat menu to help light the area near the thermostat. This light can be used to help you see your wiring and terminals when installing the thermostat on the wall. Simply toggle your selection from this menu. You have the option to display the room temperature even when the Sensi Touch screen goes to sleep. Note: The “Time Setup” sub menu will only be available when Wi-Fi is turned “off.” Sleep Mode You can access several settings and options about your thermostat in the menu. It will hold your new temperature until the next scheduled set point with a minimum hold time of two hours. Your Sensi thermostat will display the time it will hold for next to the set temperature. To temporarily change your temperature, use the up and down arrows in the app or on the thermostat. When your Schedule is “On,” your Sensi thermostat controls your home based on the time and temperature settings in the current schedule. The thermostat will hold this temperature, in the set system mode, until you turn Schedule back “On” or until you adjust the set point again using the up and down arrow buttons. If you want to hold one temperature, turn Schedule “Off.” Then, adjust the set point using the up and down arrow buttons. Leaving the fan in “On” will run your blower continuously. If you want to circulate the indoor blower, you can switch fan mode to “On.” Turn the fan back to “Auto” when you want the thermostat to control your indoor blower as necessary. When the mode is “Off” the thermostat will not bring on your heating or cooling systems. Press the mode button (see buttons and icons) to switch between all available system mode settings. Switches system mode between Heat, Cool, Off, Aux or Auto.ĭisplays current time. Leave the fan mode on Auto to allow the thermostat to control the fan as necessary. Access thermostat configurations.(See page 5 for more details).Īdjusts the temperature set point or thermostat configuration.Ĭurrent set temperature the thermostat will maintain.

Ntouch thermostat